Buy Piping Solution Factory – Stainless Steel Straight Tee – DS PIPE

Description

The steel tee is a pipe fitting and a pipe joint. Used to change the direction of the fluid, used in the branch pipe of the main pipe.

The three-way is a chemical pipe fitting with three openings, namely one inlet and two outlets; or two inlets and one outlet, having T-shaped and Y-shaped shapes, with equal-diameter nozzles and different diameter nozzles. Three identical or different pipeline collections.
Pipe tees are classified according to pipe diameter
Equal-diameter tee is widely used in the construction and maintenance of petrochemical, oil and gas, liquefied petroleum gas, chemical fertilizer, power plant, nuclear power, shipbuilding, papermaking, pharmaceutical, food hygiene, urban construction and other industries. In the industry, the pressure of such pipe fittings is relatively high, the maximum pressure can reach 600 kg, and the water pressure in the living is low, generally 16 kg.

The equal tee is the same diameter at both ends, and the method is as follows: For example, the “T3” tee indicates that the outer diameter is a 3-inch equal-diameter tee.
The material of the equal-diameter tee is generally 10# 20# A3 Q235A 20g 20G 16Mn ASTM A234 ASTM A105 ASTM A403, etc.
The outer diameter of the equal-diameter tee ranges from 2.5″ to 60″, and the 26″-60″ is a welded tee. The wall thickness is 28-60mm.
The pressure levels of the equal-diameter tees are Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, Sch100, Sch120, Sch140, Sch160, XXS.
The branch pipe is different from the other two diameters called the reducer tee. The same diameter at both ends is called an equal diameter tee. Reducing tee is widely used in the construction and overhaul of petrochemical, oil and gas, liquefied petroleum gas, chemical fertilizer, power plant, nuclear power, shipbuilding, papermaking, pharmaceutical, food hygiene, urban construction and other industries. In the industry, the pressure of such pipe fittings is relatively high, the maximum pressure can reach 600 kg, and the water pressure in the living is low, generally 16 kg.

For the reducer tee, the method is as follows: For example, “T4 x 4 x 3.5” means a reducer with a diameter of 3.5 inches and a diameter of 3.5 inches.
The material of the reducer tee is generally 10# 20# A3 Q235A 20g 20G 16Mn ASTM A234 ASTM A105 ASTMA403, etc.
The outer diameter of the reducer tee ranges from 2.5″ to 60″, and from 26″ to 60″ is the weld tee. The wall thickness is 28-60mm.
The wall thickness of the reducer tee is: Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, Sch100, Sch120, Sch140, Sch160, XXS.

Process: 1/2′ -20″: (Cold Extrusion Forming)
22″ – 48″: (Hot Extrusion Forming)
Sizes: (Seamless Type): 1/2” -20” (DN15-DN500)
(Welded Type): 1/2″ -48″ (DN15-DN1200)
Standards: GB/T12459, GBJ13401, SH3408. SH3409;
ASME/ANSI B16.9, B16.28, ASTM A403, MSS SP-43;
DIN 2605, DIN2609, DIN2615. DIN2616;
JIS B2311, JIS B2312, JIS B2313
Schedules: Sch5S-Sch80S; Sch10-Sch160; XS-XXS
Materials: TP304; TP304H; TP304L; TP316; TP316L;
TP321; TP321H; TP317L: TP310S; TP347H

Product Testing

Part Of The Process